Description
99.99% down to 0.3 micron. 9000 hours of life.
Pre-Filter + HEPA H13 + Activated Carbon, in one cartridge.
Built for smoke, toxic fumes, PM2.5, VOCs and odour control · nano-silver ion protection · indicator-led replacement · 31.2 × 3.8 × 3.8 cm · 0.92 kg · genuine Honeywell replacement filter for the Air Touch P1
A purifier is only as good as the filter sitting inside it right now. In Delhi NCR that filter works harder than almost anywhere else: construction dust from March, monsoon damp through July and August, and then the long November-to-February stretch where the AQI does not come down for weeks. This genuine Honeywell compound cartridge is rated for up to 9000 operating hours — roughly a year of real use — so a single swap carries your Air Touch P1 through an entire NCR pollution cycle at full rated performance. Fresh media means full airflow, full CADR, and the odour control you actually paid for.
Three filtration stages, one sealed cartridge
Separate filters mean separate parts to source, separate seals to get right and separate chances of a gap that lets unfiltered air slip past. Honeywell builds all three stages of the Air Touch P1's filtration into a single compound cartridge: the pre-filter that takes the coarse load, the HEPA H13 media rated to remove 99.99% of particles 0.3 microns and larger, and the activated carbon bed that handles smoke, toxic fumes, formaldehyde, cooking smells, pet odours and VOCs. One part number, one perfect fit, one push to seat it. Nano-silver ions are integrated into the media to inhibit bacterial growth on the filter surface itself.
The machine tells you when — you just swap it
You do not have to keep a note in your calendar. When the filter indicator on the Air Touch P1 control panel starts blinking, the cartridge has done its 9000 hours and it is time for a fresh one. Slide the old cartridge out, slide this one in, close the panel — the job takes minutes and needs no technician visit and no tools. In a Delhi household where the purifier runs almost continuously from Diwali to Holi, having the replacement already on the shelf is the difference between clean air on the worst-AQI night of the year and a purifier running on tired media.
🛡️ Inside the cartridge — what each layer does
Pre-Filter
Captures dust, lint, fibres, hair and pet fur — and extends the life of the HEPA layer behind it
HEPA H13
Removes 99.99% of particles 0.3 micron and larger — PM2.5, PM10, allergens, pollen, fine dust
Activated Carbon
Absorbs and neutralises smoke, toxic fumes, formaldehyde, cooking smells, pet odours and VOCs
Nano-Silver Ions
Integrated into the media to inhibit bacterial growth on the filter surface
💨 What this cartridge is built to clear
PM2.5 & PM10
The fine particulate that defines an NCR winter, down to 0.3 micron
Smoke & Fumes
Smoke and toxic fumes, taken out by the activated carbon bed
Odours & VOCs
Cooking smells, pet odours, formaldehyde and household VOCs
Allergens
Pollen, fine dust and airborne allergens caught by the H13 media
🛠️ Why the genuine Honeywell cartridge
The cartridge is the working part of the machine. A genuine Honeywell fit keeps the seal exact, the airflow path clean and the CADR your purifier was rated for intact.
Designed exclusively for the Honeywell Air Touch P1 Air Purifier — exact dimensions, exact seating, exact seal. Order by the part number HC000054 and it drops straight in.
0.3 micron is the size the HEPA standard is measured at because it is the hardest to catch. Clearing 99.99% at that size means everything bigger — and Delhi's PM2.5 load — is handled comfortably.
HEPA media handles particles. Gases need carbon. This cartridge carries a dedicated activated carbon layer for smoke, toxic fumes, formaldehyde and the kitchen — the half of indoor air quality that a particle filter alone cannot touch.
A sealed replacement cartridge keeps filtration performance consistent from the first hour to the last, and the swap itself is a two-minute job on the front panel — no tools, no service call, no downtime.
| Brand / Model | Honeywell HC000054 ✅ |
| Product Type | 3-in-1 Compound Replacement Filter Cartridge ✅ |
| Compatibility | Honeywell Air Touch P1 Air Purifier ✅ |
| Filtration Stages | Pre-Filter · HEPA H13 · Activated Carbon ✅ |
| Particle Removal | 99.99% of particles ≥ 0.3 microns ✅ |
| Captures | PM2.5 · PM10 · allergens · pollen · fine dust ✅ |
| Carbon Stage Handles | Smoke · toxic fumes · formaldehyde · cooking smells · pet odours · VOCs ✅ |
| Antibacterial | Nano-silver ion protection on filter surface ✅ |
| Filter Life | Up to 9000 operating hours / 1 year ✅ |
| Replacement Indicator | Filter indicator blinks on the Air Touch P1 panel ✅ |
| Maintenance | Sealed replacement cartridge — swapped, not washed, for consistent filtration ✅ |
| Dimensions (L×W×T) | 31.2 × 3.8 × 3.8 cm ✅ |
| Weight | 0.92 kg ✅ |
| Material | Plastic ✅ |
| Unit Count | 1 ✅ |
Why buy from Mahajan Electronics?
- We confirm the exact part fits your purifier before you buy
- 45+ years of trust in premium home appliances, since 1981
- 24-hour delivery across Delhi NCR
- GST invoice — save up to 18% on business purchases
- Mahajan seller invoice — genuine Honeywell stock
- Raja Garden · Jail Road · Dabri Mor
Order today. Delivered in 24 hours.
Honeywell HC000054 · Air Touch P1 3-in-1 Compound Filter · HEPA H13 · Activated Carbon · Nano-Silver · 99.99% at 0.3 micron · Up to 9000 hours
Image for reference only.
