Description
The Blue Star SWC150150SST is a heavy-duty storage water cooler engineered for institutions, offices, hospitals, factories, and high-footfall commercial spaces — 150 litres per hour cooling capacity matched by a 150-litre food-grade stainless steel tank, full SS interior and exterior construction for maximum hygiene, PUF insulation to reduce compressor load and electricity cost, eco-friendly refrigerant, 2 taps for simultaneous dispensing, extended drip tray and drainage, and thermostat-controlled auto cut-off. Made in India.
💧 Heavy-duty vs standard commercial — which to choose
Blue Star SWC150150SST — this model
- 150L storage + 150 LPH cooling
- Full stainless steel body — inside and out
- 2 taps for simultaneous dispensing
- PUF insulation — lower electricity cost
- For schools, hospitals, factories, large offices
Voltas WC FS 60/120 NP
- 60 LPH cooling / 120L storage
- Standard body construction
- Suitable for medium commercial spaces
- Lower upfront investment
Full stainless steel body — interior and exterior — for institutions that can't compromise on hygiene
Food-grade stainless steel on both the internal water tank and the external cabinet provides rust immunity, bacterial resistance, and easy sanitation. In institutional settings — schools, hospitals, government offices, factories — where water coolers serve hundreds of users daily and cleaning may occur with harsh disinfectants, galvanised or powder-coated steel corrodes and harbours bacteria within 2–3 years. Food-grade SS maintains the same hygienic surface indefinitely and meets institutional procurement requirements that specify stainless construction.
- 150 litres per hour (LPH) means the unit can chill 2.5 litres of water per minute continuously — sufficient for a queue of 10–15 people filling 250ml cups per minute at peak consumption
- Schools and hospitals have predictable peak demand windows — tiffin breaks, shift changes, visitor hours — where water coolers face concentrated usage. At 150 LPH, the SWC150150SST maintains cold water temperature throughout peak periods without needing recovery time
- The 150-litre pre-chilled storage reservoir adds a buffer for burst consumption — even if 100 litres are drawn rapidly, 50 litres remain chilled while the compressor replenishes
- At 7.5 amps power consumption, the operating cost is reasonable relative to the capacity — institutional buyers can run this continuously without disproportionate electricity bills
- Compare to smaller commercial coolers at 40–60 LPH which struggle with lunch break queues at schools and hospitals — the 150 LPH specification is specifically sized for 200+ daily users
PUF insulation — retains cold longer, compressor runs less, electricity bill drops
Polyurethane foam (PUF) insulation lines the tank walls and body cavity, significantly slowing heat ingress from the ambient environment. The practical effect: once the 150L tank is chilled, it stays cold longer between compressor cycles. The compressor runs fewer hours per day, reducing electricity consumption and extending compressor lifespan. For an always-on institutional water cooler running 8–12 hours daily in Delhi NCR's summer heat, PUF insulation delivers measurable electricity savings over the machine's service life.
2 Taps — Simultaneous Dispensing
Two independent dispensing taps allow two users to fill simultaneously — cutting queue time in half during peak periods. Critical for large institutions where single-tap coolers create bottlenecks at breaks and shift changes.
Thermostat Auto Cut-off
When water reaches the set temperature, the thermostat automatically switches off the compressor and restarts it when needed. Prevents over-cooling energy waste and protects the compressor from unnecessary short-cycling — extending the operational lifespan of the unit.
Silent Operation
Industrial-grade compressor engineered for quiet operation — appropriate for office environments, hospital wards, and school corridors where a noisy water cooler creates disturbance. Silent operation is a procurement requirement in healthcare and education settings.
Extended Drip Tray + Drain Pipe
Wide drip tray with a dedicated drain pipe manages spills and overflow in high-use environments — prevents puddles forming around the unit in school corridors and office pantries. Easy to clean and maintain without disassembly.
🎯 Ideal for
| Brand | Blue Star |
| Model | SWC150150SST |
| Storage capacity | 150 Litres |
| Cooling capacity | 150 Litres per Hour (LPH) |
| Number of taps | 2 |
| Body material | Food-Grade Stainless Steel (Interior + Exterior) |
| Insulation | PUF (Polyurethane Foam) |
| Refrigerant | Eco-Friendly |
| Compressor type | Industrial-Grade, Sturdy |
| Auto cut-off | Yes — Thermostat-based |
| Operation | Silent |
| Drip tray | Extended Plastic + Dedicated Drain Pipe |
| Power consumption | 7.5 Amps |
| Dimensions (W×D×H) | 790 × 589 × 235 mm |
| Weight | 64 kg |
| Country of origin | Made in India |
| Warranty | 1 Year Comprehensive |
🛡️ Warranty & support
SWC150150SST Full stainless steel. Institutional-grade. Order today.
Order before 2 PM for 24-hour delivery across Delhi NCR. GST invoice for institutional and B2B purchases.
Product image shown is for reference only. Actual serial number and manufacturing date may vary. Made in India.
Please Note: The image shown is for reference purposes only. Actual product details, including the serial number and manufacturing date, may vary.
MADE IN INDIA
