Description
Jet Air Flow for the Compact Room.
100% Copper Condenser · 5-Year Compressor Warranty.
1.1 Ton · 2 Star BEE rating · non-inverter split · anti-dust filtration · Japanese engineering built in Thailand · 1 year comprehensive and 5 years compressor warranty · sized for bedrooms, study rooms and office cabins
The compressor is the part that decides how long an AC lives, and it is the part Delhi punishes hardest. Fourteen hours a day from April to July, an outdoor unit standing in 45°C air on a terrace or a west wall, voltage that sags and surges through the evening, and dust and monsoon humidity working on it the rest of the year. Mitsubishi Heavy backs the compressor in this SRK13CRS-S6 for a full five years, on top of a year's comprehensive cover on the complete unit including parts and labour. For a bedroom or a cabin AC that you expect to simply switch on every summer and forget about, that is the number worth reading twice — it is the brand telling you how many Delhi summers this machine is built to work through.
Jet Air Flow — the whole room cools, not just the space in front of the unit
A small room is not automatically an easy room. Put a bed against the far wall, a wardrobe blocking one side and a window catching the afternoon sun, and an ordinary AC will cool the strip of air directly in front of itself while the far corner stays warm — so you drop the setpoint two degrees, and the machine runs harder for the same comfort. Mitsubishi Heavy's Jet Air Flow channels the air out at higher velocity so it carries deep into the room instead of dropping short, reaching the far corners and mixing the whole volume. The room gets to temperature evenly and faster, which in a non-inverter machine matters twice over: less time at full compressor load per cycle, and a bedroom that is actually cold at the pillow, not just at the doorway.
100% copper condenser — built for Delhi's humidity, dust and long summers
Copper moves heat faster than aluminium and resists corrosion far better, and in Delhi NCR that second point is what decides how the machine performs in its seventh summer. The outdoor unit lives outdoors: monsoon humidity in August, road grit all year, and the smog that settles over the city from November. A pure copper condenser stands up to all of it and holds its heat-exchange efficiency across years rather than months. It is also repairable rather than replaceable — when a technician does eventually need to touch it, a copper coil is a straightforward, inexpensive job instead of a new unit. Inside, the anti-dust filter takes on the other half of the Delhi problem, catching the dust that comes in every time a window opens so the air out of the vents stays clean and the coil behind it stays clear.
❄️ What is inside this machine
Jet Air Flow
High-velocity air carried right to the far corners of the room
100% Copper
Copper condenser for faster cooling and corrosion resistance
Anti-Dust Filter
Catches the dust a Delhi window brings in every time it opens
Non-Inverter
Simple fixed-speed engineering with fewer parts to go wrong
🛠️ At a glance
A 1.1-ton non-inverter is the straightforward answer for a bedroom, a study or an office cabin — the capacity matches the room, and there is very little in the machine that can go wrong.
Air leaves the indoor unit at higher velocity and carries across the room instead of dropping short — so the corner behind the wardrobe and the far side of the bed cool at the same rate as the doorway.
Faster heat transfer than aluminium and far better corrosion resistance in monsoon humidity and city dust — plus cheaper, simpler servicing, because copper coils are repaired rather than replaced.
Delhi's air brings dust indoors every time a window opens. The anti-dust filter catches it before it reaches the coil, keeping the air out of the vents clean and the heat exchanger working at full efficiency.
Sized for bedrooms, study rooms and office cabins — enough capacity to pull the room down quickly on a 45°C afternoon without paying for tonnage a small room will never use.
| Brand / Model | Mitsubishi Heavy SRK13CRS-S6 ✅ |
| Type | Non-Inverter (Fixed Speed) Split AC · Wall Mounted ✅ |
| Capacity | 1.1 Ton ✅ |
| Energy Rating | 2 Star (BEE) ✅ |
| Airflow Technology | Jet Air Flow ✅ |
| Condenser | 100% Copper ✅ |
| Filtration | Anti-Dust Filter ✅ |
| Suitable For | Bedrooms · Study Rooms · Office Cabins · Compact Living Rooms ✅ |
| Country of Origin | Made in Thailand 🇹🇭 ✅ |
| Warranty | 1 Year Comprehensive · 5 Years Compressor ✅ |
| Invoice | Mahajan Electronics GST seller invoice ✅ |
Why buy from Mahajan Electronics?
- We match tonnage to your actual room before you buy
- 45+ years of trust in premium home appliances
- Trusted since 1981
- 24-hour delivery across Delhi NCR
- GST invoice — save up to 18% on business purchases
- Mahajan Electronics seller invoice with every unit
- Expert installation guidance and after-sales support
- Raja Garden · Jail Road · Dabri Mor
Order today. Delivered in 24 hours.
Mitsubishi Heavy SRK13CRS-S6 · 1.1 Ton · 2 Star · Jet Air Flow · 100% Copper Condenser · Anti-Dust Filter · Non-Inverter · 5-Year Compressor Warranty
Image for reference only. Sold with a Mahajan Electronics GST seller invoice.
