Description
✅ 1-Year Comprehensive + 5-Year PCB + 10-Year Compressor Warranty — Authorised Mitsubishi Heavy Industries Partner · 100% Genuine · Mahajan Electronics Since 1981
2026 model. R32 refrigerant. 100% copper condenser. Jet Airflow. 31 dB quiet operation. 24-hour delivery Delhi NCR. GST invoice.
2.15 Ton. Jet Air Flow. 100% Copper Condenser.
31 dB quiet. Sleep + Dehumidifier + Auto Restart.
7200W · R32 · 1-Yr + 5-Yr PCB + 10-Yr Compressor Warranty.
The Mitsubishi Heavy Industries SRK25CAPDA-W is the 2026 fixed-speed AC engineered for large rooms requiring powerful, reliable cooling — Jet Air Flow delivers long-distance uniform air throw for 250–400 sq ft coverage; 100% copper condenser for superior heat transfer and longevity; heavy-duty rotary compressor; 31 dB near-silent indoor operation; Sleep Mode, Dehumidifier Mode, Auto Restart, Anti-Dust + Anti-Bacterial filter, Self-Diagnosis. R32 eco-refrigerant. Industry-leading 10-Year compressor warranty.
🛡️ Three-tier warranty — product, PCB, and compressor separately covered
Jet Air Flow Technology — why air throw matters in a 2.2T AC for large rooms
The fundamental challenge of cooling a 250–400 sq ft room with a wall-mounted split AC is air distribution: the indoor unit is mounted on one wall, and the air it outputs must travel across the full room width (typically 5–7 metres) to reach the opposite corners and return as warm air for recirculation. Standard AC indoor units produce a fan-speed-limited air throw of 4–6 metres — sufficient for rooms up to 180 sq ft where the unit is centrally positioned, but insufficient for larger rooms where the far corners remain warm because the conditioned air loses velocity before reaching them. Jet Air Flow Technology in the SRK25CAPDA-W uses a modified blower design — higher blade pitch, optimised scroll housing geometry, or a combination — to extend the effective air throw distance significantly beyond standard fan configurations at the same noise level. The 2026 model's airflow architecture concentrates the discharged air into a higher-velocity jet pattern (narrower spread, longer throw distance) rather than the wide, low-velocity fan discharge of standard indoor units. In a 5m × 7m living room, this means the conditioned air jet reaches the far wall with sufficient velocity to induce room-air entrainment (the Coanda effect carries surrounding unconditioned air with the jet, extending the cooling zone), rather than stalling at 4 metres and leaving the far half of the room inadequately cooled. For a 2.2T AC primarily chosen for its capacity to handle large rooms, Jet Air Flow is the delivery mechanism that ensures the 7200W of cooling capacity reaches the entire room — without it, high-capacity cooling at the indoor unit translates poorly to comfort at the room's far corners and furniture zones.
100% Copper Condenser — why the material specification matters beyond corrosion resistance
The SRK25CAPDA-W specifies a 100% copper condenser — meaning both the condenser coil tubing and the fin material are copper, as opposed to aluminium-fin copper-tube designs (the most common hybrid) or all-aluminium designs (lower cost, lower performance). Copper's thermal conductivity (385 W/m·K) is approximately 1.6× that of aluminium (237 W/m·K) — a copper fin transfers heat from the refrigerant to the outside air 60% more efficiently per unit area than an aluminium fin of the same thickness. For a 2.2T AC operating at 7200W cooling capacity (and therefore rejecting approximately 9000–10000W of heat at the outdoor condenser), this 60% conductivity advantage translates directly to condenser size reduction (a smaller condenser can reject the same heat load) or to condenser efficiency improvement (a same-size condenser rejects heat more efficiently and runs at lower condensing pressure, reducing compressor work). Beyond conductivity, copper's durability advantages are relevant: copper is more resistant to galvanic corrosion in humid environments than aluminium, and copper fins maintain their structural integrity and fin spacing over time without the work-hardening cracks that can develop in aluminium fins under thermal cycling. For a 2.2T AC with a 10-Year compressor warranty, the 100% copper condenser is the external heat exchanger that must maintain its heat rejection capacity throughout that warranty period — a full copper specification is more consistent with a 10-year durability expectation than an aluminium-fin design.
31 dB indoor noise + Sleep Mode — the quiet operation argument for large-room bedroom use
The SRK25CAPDA-W's 31 dB indoor noise level is exceptional for a 2.2T non-inverter AC — for context, a standard 2T non-inverter AC typically produces 42–48 dB at low fan speed, and a 2.2T unit pushing 1080+ CMH airflow typically produces 44–50 dB. At 31 dB, the SRK25CAPDA-W is quieter than a 1.5T inverter AC at minimum speed (which typically measures 32–36 dB) despite being a 2.2T fixed-speed unit. This near-silence is achieved through the DC fan motor design and the optimised indoor unit scroll housing that minimises turbulence-generated noise at the fan outlet. In bedroom use — the most common application for a 2.2T unit in a large master bedroom or combined bedroom-sitting room — 31 dB is effectively inaudible against typical ambient room noise (breathing, distant traffic, electronics at low volume average 25–30 dB). Sleep Mode complements this by automatically adjusting the set temperature over the sleep period — typically raising the set point by 0.5–1°C per hour for the first 2 hours of sleep (because body temperature naturally drops during sleep onset, requiring less aggressive cooling) and maintaining the adjusted temperature through the sleep cycle, reducing the frequency and abruptness of compressor cycling that would otherwise occur if the AC were trying to maintain an unnecessarily cold set temperature all night. Combined with Auto Restart (which resumes the previous operating mode and set temperature automatically after power restoration), the SRK25CAPDA-W is engineered specifically for the large-room overnight use case.
10-Year Compressor + 5-Year PCB warranty — what three-tier warranty coverage means for total cost of ownership
AC warranty structures are meaningful because the three primary failure points of a split AC occur on different time horizons: control electronics (PCB failures) typically manifest within 2–6 years from manufacturing defects, exposure to voltage spikes, or component fatigue; compressor failures occur at 7–15 years from refrigerant contamination, lubrication breakdown, mechanical wear, or voltage-related damage; refrigerant leaks and coil failures can occur at any point but are most common in years 3–8. The SRK25CAPDA-W's warranty structure covers all three: 1-Year comprehensive covers all components including coils and refrigerant circuit in year 1; 5-Year PCB warranty covers the most expensive single electronic component (PCB replacement costs ₹3,000–₹8,000 for a 2.2T AC) for 5 years; 10-Year compressor warranty covers the most expensive mechanical component (compressor replacement costs ₹8,000–₹20,000 for a 2.2T unit, plus gas charging and labour) for a decade. The practical implication: a buyer of the SRK25CAPDA-W faces near-zero unexpected repair costs for the first 5 years, and near-zero compressor replacement cost for a decade — the two largest post-purchase expense risks in AC ownership are contractually absorbed by Mitsubishi Heavy Industries for the warranty period. For a 2.2T AC in a large room that will run 6–10 hours per day for 8–9 months per year (Delhi NCR's cooling season), the 10-year compressor warranty aligns with the unit's expected operational lifespan under heavy use.
🎛️ Operating Modes + Features
Turbo Cooling
Max speed + full power — fastest room pulldown
Sleep Mode
Auto temp adjust through sleep cycle — quieter cycling
Dehumidifier Mode
Removes moisture without aggressive cooling — monsoon comfort
Auto Restart
Resumes previous settings after power cut
Self-Diagnosis
Error code display — faster service resolution
Anti-Dust + Anti-Bacterial
Filter captures dust + inhibits bacterial growth on filter
🎯 Ideal for
| Brand | Mitsubishi Heavy Industries (MHI) — not Mitsubishi Electric |
| Model | SRK25CAPDA-W |
| Model year | 2026 |
| Type | Non-Inverter (Fixed Speed) Split AC |
| Capacity | 2.15 Ton |
| Energy rating | 2 Star (2026 BEE) |
| Cooling capacity | 7200W |
| Power consumption | Approx. 1857W |
| Recommended room size | 250–400 sq ft |
| Compressor type | Heavy-Duty Rotary — Fixed Speed |
| Condenser coil | 100% Copper |
| Refrigerant | R32 — low GWP, eco-friendly |
| Airflow technology | Jet Air Flow — long-distance throw |
| Noise level (indoor) | Approx. 31 dB |
| Special modes | Turbo · Sleep · Dehumidifier · Auto Restart |
| Filter | Anti-Dust + Anti-Bacterial |
| Diagnostics | Self-Diagnosis system |
| Colour | White |
| Indoor unit dimensions | 13 × 43.3 × 10 inches |
| Outdoor unit dimensions | 29.6 × 36 × 13 inches |
| Warranty — product | 1 Year Comprehensive |
| Warranty — PCB | 5 Years |
| Warranty — compressor | 10 Years |
📦 What's in the Box
2.15T. Jet Airflow. 100% Copper. 31dB. Sleep + Dehumidifier. R32. 1-Yr + 5-Yr PCB + 10-Yr Compressor. 2026. Order today.
MHI heavy-duty engineering for large rooms — the most comprehensive AC warranty at Mahajan Electronics. 24-hour delivery Delhi NCR. GST invoice. Genuine Mitsubishi Heavy — Mahajan Electronics since 1979.
Non-Inverter/Fixed Speed — not inverter AC. Warranty service via Mitsubishi Heavy Industries service network (separate from Mitsubishi Electric). Installation charges apply separately. Product image for reference.
Please Note: The image shown is for reference purposes only. Actual product details, including the serial number and manufacturing date, may vary.
