Description
Genuine Philips carbon filter. Up to 12 months of gas and odour protection.
Honeycomb carbon with an adsorption area of 20–43 football fields.
Official NanoProtect activated carbon replacement filter for the Philips 3000 Series · removes TVOCs, formaldehyde and toluene vapours, cigarette smoke, kitchen odours, paint fumes and chemical vapours · DIY replacement in under a minute · black · 20 × 302 × 380 mm · supplied sealed
Unfold the carbon inside this filter and the adsorption surface works out to somewhere between twenty and forty-three football fields. That number is the whole story of a gas filter: adsorption is a surface-area game, and surface area is what decides how long a filter keeps pulling gases out of the air instead of simply passing them through. It is why this one is rated for up to 12 months of continuous filtration under Indian air conditions — through a Diwali week, a winter inversion, a kitchen running two tadkas a day, and the months after new furniture arrives and quietly gives off solvent.
NanoProtect activated carbon — for the pollution you cannot see
A HEPA layer handles particles. Gases need carbon. The FY3432/00 is the official NanoProtect activated carbon filter for the Philips 3000 Series, and it works on the invisible half of indoor air pollution: TVOCs — toxic volatile organic compounds — along with formaldehyde and toluene vapours, cigarette smoke, kitchen odours, paint fumes and chemical smells. In a Delhi flat with the windows shut from November to February, these are the pollutants that accumulate quietly, and they are the ones you notice by smell long after they have started building up. Fitting a genuine carbon filter is what keeps that half of the job being done.
Honeycomb carbon structure — consistent removal, month after month
The carbon is arranged as high-density honeycomb cells that trap pollutants inside nano-porous chambers rather than holding them loosely on the surface. That structure is what gives the filter its very large adsorption area and, more importantly, what keeps gas removal consistent over time instead of dropping off after the first few weeks. Replacement is a genuine DIY job — no technician, no service call, under a minute with the purifier open on the floor — and your Philips purifier tells you when it is time through the Healthy Air Protect Alert, so an expired filter never stays in by accident.
🫧 What the carbon layer takes out of your air
TVOCs
Toxic volatile organic compounds — the invisible half of indoor pollution
Formaldehyde & Toluene
Vapours from new furniture, boards, adhesives and fresh paintwork
Smoke & Kitchen Odours
Cigarette smoke, cooking smells and the smoke that drifts in from outside
Chemical & Paint Fumes
Solvent and chemical vapours from paint and household products
⏳ When to change it
Urban Air
Replace every 10–12 months in normal urban air conditions
High Pollution Area
Replace every 6–9 months where pollution loads are consistently high
Auto Mode Use
Replace when the purifier indicates that filter life is over
Healthy Air Protect
Philips shows remaining filter life on screen and alerts you on time
🔩 Fitment and essentials
This is the official Philips replacement part for the 3000 Series purifiers listed above — the exact filter the machine was engineered around, in a sealed pack.
Philips' own carbon filtration, targeting the gases a particle filter cannot hold: TVOCs, formaldehyde and toluene vapours, smoke, kitchen odours and chemical smells.
Pollutants are trapped inside nano-porous chambers, and the large adsorption surface is what makes gas removal consistent for the whole life of the filter rather than just at the start.
Designed to deliver continuous filtration under Indian air conditions, with the replacement interval set by how heavy the air load in your area actually is.
No technician required. Open the purifier, swap the filter, close it — under a minute — and the Healthy Air Protect Alert resets you to a full filter life.
| Brand / Model | Philips FY3432/00 ✅ |
| Product Type | Air Purifier Replacement Filter ✅ |
| Filter Type | NanoProtect Activated Carbon ✅ |
| Structure | High-density honeycomb carbon cells with nano-porous chambers ✅ |
| Removes | TVOCs · formaldehyde · toluene vapours · smoke · kitchen odours · paint fumes · chemical & gas pollutants ✅ |
| Adsorption Area | Unfolded, approximately 20–43 football fields ✅ |
| Filter Life | Up to 12 months ✅ |
| Replacement Guidance | Normal urban air 10–12 months · high pollution area 6–9 months · auto mode, when the purifier indicates ✅ |
| Filter Alert | Philips Healthy Air Protect Alert shows filter life on screen ✅ |
| Compatible Models | Philips AC3256 · AC3257 · AC3259 ✅ |
| Installation | DIY — replace in under 1 minute, no technician required ✅ |
| Colour | Black ✅ |
| Dimensions | 20 × 302 × 380 mm ✅ |
| Power Source | Manual ✅ |
| Box Contents | 1 × Philips FY3432/00 Activated Carbon Filter, sealed ✅ |
| Invoice | Mahajan Electronics GST seller invoice ✅ |
Why buy from Mahajan Electronics?
- 100% original Philips filter, supplied sealed
- 45+ years of trust in premium home appliances, since 1981
- 24-hour delivery across Delhi NCR
- GST invoice — save up to 18% on business purchases
- Mahajan Electronics seller invoice with every unit, plus after-sales support
- Raja Garden · Jail Road · Dabri Mor
Order today. Delivered in 24 hours.
Philips FY3432/00 · NanoProtect Activated Carbon Filter · For AC3256 · AC3257 · AC3259 · Up to 12 Months Life
Image for reference only.
