Description
15 LPH Cooling. 40L Storage.
Stainless Steel · R-134a · 35mm PUF · Reciprocating Compressor.
AUS J1 grade stainless steel · fin & tube condenser · CFC-free refrigerant · 10–25°C range · 1 cold tap · 460×582×1217mm · commercial-grade build
What these numbers mean for a real institution: 15 litres/hour is the sustained cooling rate — the cooler chills 15L of fresh water every hour continuously. The 40L storage tank acts as a buffer for peak demand: during a lunch break or class change when 50+ people need water in 15 minutes, the tank delivers pre-cooled water faster than the cooling rate alone. Together, this sizing suits medium-footfall environments of roughly 50–100 people.
35mm In-Situ PUF Insulation — why it matters for running cost
PUF (Polyurethane Foam) is the same insulation used in refrigerators and cold-storage. "In-situ" means the foam is injected and cured directly inside the tank walls — filling every gap without seams where heat can leak. At 35mm thickness, the cooler retains chilled water for extended periods even when the compressor cycles off or during power cuts — meaning the compressor runs less often to maintain temperature. For an institution running the cooler 10+ hours daily, this directly reduces electricity consumption and compressor wear over the years.
AUS J1 Grade Stainless Steel — panels, tank & faucets
Food-grade stainless steel on all water-contact surfaces — the storage tank, outer panels, and faucets. Resists rust and corrosion in humid Delhi NCR conditions, doesn't leach into drinking water, and cleans easily for hygiene compliance in schools and clinics. Far more durable than plastic-bodied coolers in high-traffic institutional use.
CFC-free refrigerant with zero ozone depletion potential — meets environmental compliance for institutions with green procurement policies. Efficient cooling with lower environmental impact than older refrigerants.
Sealed compressor design keeps out dust and moisture — critical for reliability in dusty Delhi NCR environments. Reciprocating compressors are proven, robust, and easy to service through Voltas's nationwide network. Built for continuous institutional duty cycles.
Fin & tube condenser maximises heat dissipation surface area — faster, more efficient cooling. Standard proven technology used across commercial refrigeration, easy to clean and maintain for facilities teams.
460×582mm footprint with 1217mm height — fits in corridors, entryways, and compact service areas without obstructing walkways. Vertical form factor maximises storage capacity while minimising floor space in tight institutional layouts.
🎯 Ideal For
| Brand / Model | Voltas WC FS 15/40 |
| Type | Cold Water Cooler (Floor-Standing) |
| Cooling Capacity | 15 Litres/hour |
| Storage Capacity | 40 Litres |
| Taps | 1 (Cold Water) |
| Temperature Range | 10°C – 25°C |
| Refrigerant | R-134a (CFC-free) |
| Compressor | Hermetically Sealed Reciprocating |
| Condenser | Fin & Tube |
| Insulation | 35mm In-Situ PUF |
| Material | AUS J1 Stainless Steel / Pre-coated GI |
| Dimensions (W×D×H) | 460 × 582 × 1217 mm ✅ |
| Origin | Made in India 🇮🇳 (Tata / Voltas) |
Why buy from Mahajan Electronics?
- 45+ years of trusted retail experience
- 24-hour delivery across Delhi NCR
- GST invoice — save up to 18% on business purchases
- 100% genuine Voltas products · Tata engineering
- Installation support & service coordination
- Raja Garden · Jail Road · Dabri Mod
Order today. Delivered in 24 hours.
15 LPH · 40L Storage · AUS J1 Stainless Steel · R-134a · 35mm PUF · Made in India · Commercial Grade
Cools water only — does not purify. Warranty duration, wattage, and weight not stated — confirm at purchase. Image for reference only.
Please Note: The image shown is for reference purposes only. Actual product details, including the serial number and manufacturing date, may vary.
Made in india
