Description
✅ 1-Year Warranty — Authorised Voltas Partner · Made in India · Mahajan Electronics Since 1981
Hot 5L/hr · Cold 2L/hr at 10°C–13.5°C · Normal · SS304 stainless steel tank · Built-in refrigerator · Hot water safety lock · LED indicators · 500W · 230V/50Hz ✅ · White & Blue · Mini Magic Pure-R.
🌡️ Hot · Cold · Normal — what each tap delivers
🔴 Hot Water
Output: 5 L/hr
Tea · coffee · instant soups · noodles
Safety lock: press + hold required
⚠️ Dispensed temp not stated — verify
🔵 Cold Water
Output: 2 L/hr
Temperature: 10°C–13.5°C ✅
Storage: 3 Litres
Chilled drinking water · summer hydration
⬜ Normal Water
Room temperature
Daily hydration · medicines · cooking
No heating/cooling energy used
🔩 SS304 Stainless Steel Inner Tank — why it matters vs plastic tanks
Rust-Free Indefinitely
SS304 contains 18% chromium — forms a self-repairing passive oxide layer that prevents rust even with prolonged water contact. Plastic tanks degrade and develop microfissures over 2–4 years of thermal cycling.
No Plastic Leaching
SS304 is fully inert — no BPA, no plasticiser migration, no taste or odour transfer to stored water even at hot water temperatures. Food-grade certified for direct water contact.
Hygienic Surface
Stainless steel's non-porous surface resists biofilm formation (bacterial colonies that form in surface micro-pores of plastic tanks over time). Easier to sanitise in periodic cleaning.
Long Service Life
SS304 tank does not degrade, crack, or discolour with age — the tank is expected to outlast other dispenser components, making it a long-term value proposition over plastic-tank alternatives.
SS304 in water dispensers — the full material science and food-safety case
SS304 (AISI 304, UNS S30400) is an austenitic stainless steel alloy containing approximately 18% chromium and 8–10.5% nickel, with carbon content below 0.08%. It is the most widely used stainless steel grade in food and beverage contact applications globally — it is the grade used in commercial kitchen equipment, food processing machinery, beverage tanks, and hospital equipment. The corrosion resistance of SS304 is the result of a passive chromium oxide (Cr₂O₃) film that forms spontaneously on the surface when exposed to oxygen — this film is approximately 1–5 nanometres thick, invisible, and self-repairing: if scratched or abraded, the passive film reforms immediately in the presence of oxygen. In the context of a water dispenser: the inner tank is in continuous contact with cold water (in the cold tank) and with hot water (in the hot water tank) — two conditions that rapidly degrade inferior materials. Plastic tanks subjected to the thermal cycling of a hot water dispenser system (cold storage at 10–14°C, hot storage at 85–95°C, repeated daily for years) develop microfissures in the polymer matrix over 18–36 months of service; these micro-cracks harbour bacterial biofilm and, in lower-quality plastics, become sites for plasticiser leaching. In hot water systems specifically, certain plasticisers (phthalates and bisphenol compounds) mobilise at elevated temperatures and can migrate into stored water — this is the basis for the well-publicised concerns about BPA in hot water contact applications. SS304 has no such concern: it is biologically inert and does not release ions or organic compounds into water at normal dispenser operating temperatures. In India, the Bureau of Indian Standards (BIS) specifies food-grade stainless steel for water contact in IS 14543 and related standards. SS304 meets and exceeds these requirements. The food-grade designation (indicated by manufacturer certification) distinguishes SS304 from lower-grade stainless or chrome-plated steel that may not provide equivalent corrosion or leaching resistance. The practical buyer implication: for an appliance storing and dispensing water that family members drink multiple times daily, the SS304 inner tank of the Pure-R provides a measurable food-safety and durability advantage over unlabelled plastic tank alternatives.
Hot water safety lock — multi-generational household safety context
The hot water dispensed by this unit (temperature not stated in source — verify, but typically 85–95°C for dispensers of this class) represents a burn hazard requiring deliberate two-step operation to prevent accidental dispensing. The safety lock mechanism requires simultaneous engagement of a secondary control before the hot tap can be depressed — this prevents single-accidental-contact activation and makes it physically difficult for young children who lack the coordination to operate two separate controls simultaneously. For home offices, clinics, and reception areas where adults are the primary users, the lock adds a brief but intentional pause before hot water dispensing — a useful behavioural prompt that reduces accidental burns from rapid tap operation. For homes with toddlers: ensure the dispenser is positioned with its hot tap above the child's reach height (the 940mm height of floor-standing dispensers typically places the taps at approximately 800–850mm from floor — most toddlers' reach extends to 700–750mm, but verify your specific child's reach). For offices with elderly users with limited hand dexterity: verify the specific safety lock mechanism is operable with one hand or with limited grip strength before purchase — some push-button lock mechanisms require precise simultaneous control that may challenge users with arthritis or reduced hand strength.
Water input and maintenance — Delhi NCR hard water and descaling for SS304 dispensers
The SS304 inner tank resists corrosion, but it does not prevent mineral scale (limescale) formation from hard water — limescale is a calcium carbonate (CaCO₃) and magnesium carbonate deposit that precipitates from dissolved minerals in hard water when water is heated. Delhi NCR municipal water has TDS of 200–500 ppm in most distribution areas, with significant calcium and magnesium hardness that promotes scale formation on any heated surface, including SS304 heating elements. In the hot water system of the Pure-R, the immersion heating element (the primary source of heat) is the most vulnerable component to scale buildup — calcium carbonate deposits on the element surface create an insulating layer that reduces heat transfer efficiency, increases element surface temperature, and over time causes element burnout through overheating. Periodic descaling (every 3–6 months in Delhi NCR conditions) using a food-safe citric acid or dilute acetic acid solution is the standard maintenance procedure — the acid dissolves calcium carbonate deposits (CaCO₃ + 2CH₃COOH → Ca(CH₃COO)₂ + H₂O + CO₂) without damaging SS304 (which is resistant to dilute organic acids at room temperature). For jar-based dispensers using packaged water: packaged drinking water at BIS standards has lower TDS than municipal tap water, reducing scale formation rates — but some scale deposition occurs even in low-TDS water over time and periodic descaling remains appropriate. The SS304 tank surface itself is easy to clean during periodic maintenance — the non-porous surface releases deposited films cleanly without the residue that accumulates in scratched or porous plastic tanks.
⚙️ All Features
SS304 Stainless Steel Tank
Food-grade · rust-free · no leaching · hygienic
3 Temperature Modes
Hot · Cold (10–13.5°C ✅) · Normal
Built-in Refrigerator
Bottom compartment — milk, drinks, snacks, medicines
Hot Water Safety Lock
Double-action child protection on hot tap
LED Indicators
Power · Heating · Cooling status — real-time
Made in India
Floor-mounted · White & Blue · 230V/50Hz ✅
🎯 Ideal for
| Brand | Voltas |
| Model | Mini Magic Pure-R |
| Type | Floor-Mounted Water Dispenser with Built-in Refrigerator |
| Inner tank material | SS304 Food-Grade Stainless Steel ✅ |
| Cold water output | 2 Litres/Hour |
| Cold water temperature | 10°C–13.5°C ✅ confirmed |
| Cold water storage | 3 Litres |
| Hot water output | 5 Litres/Hour |
| Safety lock (hot tap) | Yes — double-action child protection |
| Built-in refrigerator | Yes — bottom compartment |
| LED indicators | Yes — Power · Heating · Cooling |
| Power consumption | 500W ±5% |
| Power supply | 230V ~ 50Hz ✅ |
| Colour | White & Blue |
| Origin | Made in India |
| Warranty | 1-Year Product Warranty ✅ |
🛡️ 1-Year Warranty + Authorised Voltas Partner
🏆 Why Buy from Mahajan Electronics?
- ✅Trusted 45+ years of experience in premium appliances.
- ✅24-hour delivery across Delhi NCR during business hours, subject to serviceability and stock.
- ✅GST invoice available — save up to 18% on eligible business purchases.
- ✅100% genuine Voltas products with official brand warranty.
- ✅Expert product consultation and dedicated after-sales support.
- ✅Competitive pricing and premium offer assistance.
- ✅Stores: Raja Garden, Jail Road and Dabri Mod.
- ✅Call / WhatsApp: +91-9710000251.
SS304 Tank ✅. Hot · Cold (10–13.5°C ✅) · Normal. Built-in Refrigerator. Safety Lock. LED. 500W. 230V ✅. Made in India. 1-Year Warranty. Order today.
Food-grade SS304 stainless steel tank — the hygienic upgrade for Delhi NCR homes and offices. Hot tea on demand, confirmed cold at 10–13.5°C, normal tap, built-in fridge. 24-hour delivery. GST invoice. Genuine Voltas — Mahajan Electronics since 1981.
Hot water dispensed temperature not stated — verify at purchase; hot water dispensers typically deliver 85–95°C — use the safety lock as intended and keep children away from the hot tap. Cold water confirmed at 10°C–13.5°C — pleasantly cold for drinking, not near-freezing. Built-in refrigerator compartment size (litres) and temperature not stated — verify for intended storage use before purchase; note that an unspecified compartment temperature may not meet strict medicine cold-chain requirements (e.g. insulin: 2–8°C). Physical dimensions not stated ("Standard floor-mount size") — measure your intended installation space and confirm unit dimensions with Mahajan Electronics before purchase. Weight not stated — verify for delivery logistics. Cooling power (watts) and refrigerant type not stated — verify at purchase. SS304 stainless steel resists corrosion but does not prevent mineral scale from hard water — descale the heating element every 3–6 months in Delhi NCR conditions. 500W element requires a dedicated wall socket rated for continuous 500W+ load. Product image for reference.
Perfect Blend of Hydration, Hygiene & Storage – Order Now for Fast Delivery & Best Price Guarantee!
Made in India
