Description
40 Litres of Chilled Water Every Hour.
Stainless Steel Tank · 35 mm PUF Insulation · Dual Taps.
Commercial-grade floor-standing water cooler · 40 L storage tank · hermetically sealed reciprocating compressor · fin & tube condenser · 10°C–25°C dispensing range · stainless steel tank, trough and faucets · compact vertical footprint of just 460 mm width
Think about what a Delhi office actually does between 12 noon and 4 PM in May. Thirty, forty, sixty people walking up to the cooler with a glass or a bottle, one after another, on a 45°C afternoon when everybody is drinking twice as much as they do in January. A cooler that chills slowly runs out by lunchtime and serves lukewarm water for the rest of the day. This Voltas chills 40 litres every hour and holds 40 litres in reserve in its stainless steel tank — so the hundredth person of the day gets the same cold glass as the first. That combination of live cooling rate plus stored capacity is exactly what separates a commercial water cooler from a household one.
Hermetically sealed reciprocating compressor + fin & tube condenser
The cooling engine is the part that decides whether a water cooler survives five summers or five months. Voltas uses a hermetically sealed reciprocating compressor — sealed against dust, moisture and the fine grit that hangs in Delhi air, so there is no exposed shaft or gasket for pollution to work its way into. It is paired with a fin & tube condenser, which pushes heat out fast across a large surface area, letting the unit recover its cooling rate quickly after a rush of users. It is a proven, serviceable, industrial-pattern refrigeration circuit built for continuous daily duty in Indian operating conditions — not a light-duty design asked to do a heavy-duty job.
Stainless steel where the water touches — tank, trough and faucets
Every surface that drinking water actually contacts on this cooler is stainless steel: the 40 L storage tank, the drip trough and the faucets themselves. That matters more in Delhi NCR than almost anywhere — with borewell and tanker water carrying dissolved salts and minerals, plastic and mild-steel parts stain, scale and eventually taint the taste. Stainless steel resists corrosion, wipes clean, and stands up to daily sanitising and descaling without degrading. The outer body is built from stainless steel AUS J1 with pre-coated GI panels, so the cabinet takes knocks, trolley bumps and mop-water in a busy corridor and still looks like equipment you are happy to have near reception.
🏢 Sized for real commercial floors
Offices & Showrooms
Keeps a full floor of staff and walk-in visitors hydrated through the working day
Schools
Two taps and 40 L in the tank handle the rush the moment the bell goes
Hospitals
Stainless steel contact parts for hygienic dispensing in patient and visitor areas
Factories
Commercial-duty build for shop floors where the cooler runs all shift, every shift
🎛️ How the cold water reaches the glass
40 LPH Cooling
Sealed reciprocating compressor chills 40 litres every hour, continuously
40 L SS Tank
A full 40-litre stainless steel reserve so peak hours never run the tank dry
35 mm PUF
In-situ PUF insulation holds the cold in when the power goes out
Two Faucets
Cold and normal taps let two people fill at once instead of queueing
🛠️ Built into the cabinet
The 35 mm PUF insulation is the quietly valuable one in Delhi. Power cuts are part of the day here, and insulation is what decides whether the tank is still cold when the supply returns — it also cuts compressor cycling, which means a lower running cost and a longer compressor life.
Rated to chill forty litres an hour, which is the band that comfortably covers medium-to-high daily drinking water demand — a full office floor, a school corridor, a factory shift.
Foamed in place around the tank rather than wrapped on afterwards, so there are no gaps for heat to leak through. Cold water stays cold longer and the compressor runs less often.
The footprint is under half a metre wide, so it stands neatly in a pantry corner, a corridor alcove or beside a reception desk without eating usable floor space.
Two faucets — cold and normal — mean two people served at the same time and a choice of temperature, which matters in winter and for anyone who prefers water at room temperature.
| Brand / Model | Voltas WC PS 40/80 ✅ |
| Product Type | Stainless Steel Water Cooler ✅ |
| Cooling Capacity | 40 Litres per Hour ✅ |
| Storage Capacity | 40 Litres ✅ |
| Number of Taps | 2 ✅ |
| Tap Configuration | Cold / Normal ✅ |
| Compressor | Hermetically Sealed Reciprocating ✅ |
| Condenser | Fin & Tube Type ✅ |
| Thermal Insulation | 35 mm In-Situ PUF ✅ |
| Dispensing Temperature Range | 10°C – 25°C ✅ |
| Tank / Trough / Faucets | Stainless Steel ✅ |
| Outer Body | Stainless Steel AUS J1 / Pre-Coated GI ✅ |
| Design | Compact Vertical ✅ |
| Installation Type | Floor Standing ✅ |
| Dimensions (W × H × D) | 460 × 582 × 1217 mm ✅ |
| Application | Office · Factory · School · Hospital · Showroom · Commercial Spaces ✅ |
| Warranty | Voltas manufacturer warranty ✅ |
Why buy from Mahajan Electronics?
- We match cooling capacity to your actual headcount before you buy
- 45+ years of trust in home and commercial appliances since 1981
- 24-hour delivery across Delhi NCR
- GST invoice — save up to 18% on business purchases
- Original Voltas product with manufacturer warranty support
- Installation support and after-sales service
- Mahajan Electronics seller invoice with every unit
- Raja Garden · Jail Road · Dabri Mor
Order today. Delivered in 24 hours.
Voltas WC PS 40/80 · 40 LPH Cooling · 40 L Stainless Steel Tank · Dual Taps · 35 mm PUF Insulation · Floor Standing
Image for reference only. Sold with a Mahajan Electronics GST seller invoice.
